Business

What is MSHA Training?

The Mine Safety and Health Administration (MSHA) previously had responsibility for federal mine safety and health legislation under the department of the Bureau of Mines. And now it’s working with governing body overseeing the safety of mines. MSHA training is responsible for all the safety of you and your employees. For mine operators, MSHA is providing all the relevant assistance either technical or education to them. According to the recent news, it is confirmed that from 1978 to 1980, MSHA has successfully conducted 50,000 inspections.

An overview of MSHA Training – Part 46 & Part 48

To identify and minimize the exposure to hazards found in mines that whens msha training comes to assistance for the miners. MSHA training includes all the responsibilities and rights that include material and electrical safety, hazard communication, and emergency plan of actions including first aid. There are two modules included in this safety training known as MSHA 48 and MSHA 46.

The module known as MSHA 48 includes all the training related to underground mining while MSHA 46 includes surface miner training. The only significant difference is the location of the mine between Parts 46 and 48. Part 46 covers the above-ground whereas Part 48 covers the underground. There is also a distinction between the two parts concerning the type of material being mined – non-metals (Part 46) versus metals (Part 48). It’s essential for all the new mining employees, contractors, and experts to train according to get this training. All the mine sites are regulated by Mine Safety and Health Administration to certify that everything is working on MSHA regulation.

Difference between Part 46- Part 48

Part 46

For Part 46, the required training must be fulfilled. The Mine safety personnel are responsible for verifying all training times, topics and maintaining all documentation required by MSHA. It’s important for the part 46 training to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines to have a training plan approved by (MSHA). As per Part 46, the miners must be informed when a plan is submitted to an MSHA Regional Manager for approval. Mining operators and independent contractors should be notified of any request by the mining operators and their representatives for review and approval of the plan by the Regional Manager.

Part 48

Before initiating any mining process, Part 48 Training Plans must be approved by MSHA. As a contractor, training will be according to the Plan of the mine. Even if you have a working experience of 10 years or more site-specific training will be a must process to follow. As under Part 48, you are considered to be a new miner even if you already have a minor experience of Part 46. Part 48 has two subparts including underground operations and surface areas of the mining operation.

Topics and Regulations Covered in MSHA Training

National Mine Health and Safety Academy developed this safety training course. The MSHA compliant is the top safety training provider. The person working with surface mines, plants, or mills can take this msha training. There are multiple subjects covered in this training through which an employee will learn classification of hazards, materials handling definitions, risk factors for injury, tripod lift, lifting lightweight items, personal protective equipment, prevention of injury, along with some other subjects too. The training will include general safety precautions such as pedestrian safety, pedestrian clearance, visibility, evaluation, and training too.

The training sessions can be taken online or offline but you need at least 2 hours in order to complete the course and for the annual refresher training, miners must spend no less than 8 hours recertifying. In the refresher training course, miners will cover topics like mandatory safety and health standards, information about physical hazards associated with chemicals in the miner’s workplace, protective measures for miners, and communication and transportation controls.

Other Training Programs and Courses Offered By MSHA

The Mine Safety and Health Administration (MSHA) offers both onsite and online msha certification programs and courses. NMHS Academy in Beaver, West Virginia, offers regular in-person training and can also come to your workplace upon request.

  • National Mine Health and Safety Academy
  • Part 50 Training Program
  • State Grant Programs
  • Brookwood-Sago Mine Safety Grants
  • Miners’ Rights and Responsibilities
  • Miners’ Representatives Guide
  • Workplace Examinations for Surface Metal/Nonmetal Mines

The following programs are part of MSHA’s major training programs. Taking part in these programs will prove useful to you and your miners.

Fry Electronics Team

Fry Electronics.com is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – admin@fry-electronics.com. The content will be deleted within 24 hours.

Related Articles

Back to top button